How To: Change Your Ip In Less Then 1 Minute

How To: Change Your Ip In Less Then 1 Minute

You should now be at an MSDOS prompt screen.

4. Type “ipconfig /release” just like that, and hit “enter”
5. Type “exit” and leave the prompt
6. Right-click on “Network Places” or “My Network Places” on your desktop.
7. Click on “properties”

You should now be on a screen with something titled “Local Area Connection”, or something close to that, and, if you have a network hooked up, all of your other networks.

8. Right click on “Local Area Connection” and click “properties”
9. Double-click on the “Internet Protocol (TCP/IP)” from the list under the “General” tab
10. Click on “Use the following IP address” under the “General” tab
11. Create an IP address (It doesn’t matter what it is. I just type 1 and 2 until i fill the area up).
12. Press “Tab” and it should automatically fill in the “Subnet Mask” section with default numbers.
13. Hit the “Ok” button here.
14. Hit the “Ok” button again.

You should now be back to the “Local Area Connection” screen.

15. Right-click back on “Local Area Connection” and go to properties again.
16. Go back to the “TCP/IP” settings
17. This time, select “Obtain an IP address automatically”
tongue.gif 18. Hit “Ok”
19. Hit “Ok” again
20. You now have a new IP address

With a little practice, you can easily get this process down to 15 seconds.

P.S:
This only changes your dynamic IP address, not your ISP/IP address. If you plan on hacking a website with this trick be extremely careful, because if they try a little, they can trace it back.

Default Passwords for Phreaking

Samsung secret codes

For your references!

Unlocking codes for Samsung:

v200, s100, s300

1. press *2767*63342#
2. press *2767*3855#
3. press *2767*2878#
4. press *2767*927#
5. press *2767*7822573738# unlocked code
6. now ur phone unlocked

Unlock code for:

A800/A300 - *2767*637#
V200 - *2767*7822573738#
S500/X100/samsung E700/S500/X600/430/410 - *2767*688# OR TRY NEW CODE #*7337#
*#8999*8378# (All in one code)
*#4777*8665# (GPRS TOOL)
*2767*2878# reset codes for Samsungs plus resets security codes BACK TO 00000000
SGH-600:
*2767*3855# FULL EPPROM RESET/UNLOCK CODE.

*2767*688# = Unlocking Code
*#8999*8378# = All in one Code
*#4777*8665# = GPSR Tool
*#8999*523# = LCD Brightness
*#8999*3825523# = External Display
hello boys !
i type here all samsung unlock and options code !
*#8999*377# = Errors
#*5737425# = JAVA Something{I choose 2 and it chrashed}][/b]
*#2255# = Call List

#*536961# = Java Status Code
#*536962# = Java Status Code
#*536963# = Java Status Code
#*53696# = Java Status Code

#*1200# = AFC DAC Val
#*1300# = IMEI
#*1400# = IMSI

#*2562# = ??? White for 15 secs than restarts.
#*2565# = Check Blocking
#*3353# = Check Code
#*3837# = ??? White for 15 secs than restarts.
#*3849# = ??? White for 15 secs than restarts.
#*3851# = ??? White for 15 secs than restarts.
#*3876# = ??? White for 15 secs than restarts.

#*7222# = Operation Typ (Class C GSM)
#*7224# = I Got !! ERROR !!
#*7252# = Oparation Typ (Class B GPRS)
#*7271# = Multi Slot (Class 1 GPRS)
#*7274# = Multi Slot (Class 4 GPRS)
#*7276# = Dunno
#*7337# = EEPROM Reset (Unlock and Resets Wap Settings)
#*2787# = CRTP ON/OFF
#*3737# = L1 Dbg data
#*5133# = L1 Dbg data
#*7288# = GPRS Attached
#*7287# = GPRS Detached
#*7666# = SrCell Data
#*7693# = Sleep Act/DeAct (Enable or Disable the Black screen after doing nothing for a while)
#*7284# = Class : B,C or GPRS
#*2256# = Calibration Info
#*2286# = Battery Data
#*2527# = GPRS Switching (set to: class 4, class 8, class 9 or class 10)
#*2679# = Copycat feature (Activate or Deactivate)
#*3940# = External loop test 9600 bps
#*4263# = Handsfree mode (Activate or Deactivate)
#*4700# = Half Rate (Activate or Deactivate)
#*7352# = BVMC Reg value
#*8462# = Sleeptime
#*2558# = Time ON
#*3370# = EFR (Activate or Deactivate)
#*3941# = External looptest 115200 bps
#*5176# = L1 Sleep
#*7462# = SIM phase
#*7983# = Voltage/Frequenci (Activate or Deactivate)
#*7986# = Voltage (Activate or Deactivate)
#*8466# = Old time
#*2255# = Call ???
#*5187# = L1C2G trace (Activate or Deactivate)
#*5376# = ??? White for 15 secs than restarts.
#*6837# = Official Software Version
#*7524# = KCGPRS
#*7562# = LOCI GPRS
#*7638# = RLC allways open ended TBF (Activate or Deactivate)
#*7632# = Sleep mode Debug
#*7673# = Sleep mode RESET
#*2337# = Permanent Registration Beep
#*2474# = ???
#*2834# = Audio Path
#*3270# = DCS support (Activate or Deactivate)
#*3282# = Data (Activate or Deactivate)
#*3476# = EGSM (Activate or Deactivate)
#*3676# = Flash volume formated
#*4760# = GSM (Activate or Deactivate)
#*4864# = Dunno doesn’t work on newer versions
#*5171# = L1P1
#*5172# = L1P2
#*5173# = L1P3
#*7326# = Accessory (I got Vibrator)
#*7683# = Sleep variable (8)
#*7762# = SMS Brearer CS (Activate or Deactivate)
#*8465# = Time in L1
#*9795# = wtls key
#*2252# = Current CAL
#*2836# = AVDDSS Management (Activate or Deactivate)
#*3877# = Dump of SPY trace
#*7728# = RSAV done# (Everything went to standart but nothing was deleted)
#*2677# = ARM State (None or Full Rate)
*#8999*636# = Have no clue what it is, i see 20 lines
*#9999# = Software version
*#8999*8376263# = HW ver, SW ver and Build Date
*#8888# = HW version
*#8377466# = Same HW/SW version thing

*#7465625# = Check the locks
*7465625*638*Code# = Enables Network lock
#7465625*638*Code# = Disables Network lock
*7465625*782*Code# = Enables Subset lock
#7465625*782*Code# = Disables Subset lock
*7465625*77*Code# = Enables SP lock
#7465625*77*Code# = Disables SP lock
*7465625*27*Code# = Enables CP lock
#7465625*27*Code# = Disables CP lock
*7465625*746*Code# = Enables SIM lock
#7465625*746*Code# = Disables SIM lock
*7465625*228# = Activa lock ON
#7465625*228# = Activa lock OFF
*7465625*28638# = Auto Network lock ON
#7465625*28638# = Auto Network lock OFF
*7465625*28782# = Auto subset lock ON
#7465625*28782# = Auto subset lock OFF
*7465625*2877# = Auto SP lock ON
#7465625*2877# = Auto SP lock OFF
*7465625*2827# = Auto CP lock ON
#7465625*2827# = Auto CP lock OFF
*7465625*28746# = Auto SIM lock ON
#7465625*28746# = Auto SIM lock OFF

*2767*3855# = E2P Full Reset
*2767*2878# = E2P Custom Reset
*2767*927# = E2P Wap Reset
*2767*226372# = E2P Camera Reset
#*6420# = MIC Off
#*6421# = MIC On
#*6422# = MIC Data
#*6428# = MIC Measurement
#*3230# = Trace enable and DCD disable
#*3231# = Trace disable and DCD enable
#*3232# = Current Mode
#7263867# = RAM Dump (On or Off)
*2767*49927# = Germany WAP Settings
*2767*44927# = UK WAP Settings
*2767*31927# = Netherlands WAP Settings
*2767*420927# = Czech WAP Settings
*2767*43927# = Austria WAP Settings
*2767*39927# = Italy WAP Settings
*2767*33927# = France WAP Settings
*2767*351927# = Portugal WAP Settings
*2767*34927# = Spain WAP Settings
*2767*46927# = Sweden WAP Settings
*2767*380927# = Ukraine WAP Settings
*2767*7927# = Russia WAP Settings
*2767*30927# = GREECE WAP Settings
*2767*73738927# = WAP Settings Reset
*2767*49667# = Germany MMS Settings
*2767*44667# = UK MMS Settings
*2767*31667# = Netherlands MMS Settings
*2767*420667# = Czech MMS Settings
*2767*43667# = Austria MMS Settings
*2767*39667# = Italy MMS Settings
*2767*33667# = France MMS Settings
*2767*351667# = Portugal MMS Settings
*2767*34667# = Spain MMS Settings
*2767*46667# = Sweden MMS Settings
*2767*380667# = Ukraine MMS Settings
*2767*7667#. = Russia MMS Settings
*2767*30667# = GREECE MMS Settings
*335# = Delete all MMS Messages
*663867# = Dump Mm file
#*536961# = WAPSAR enable / HTTP disable
#*536962# = WAPSAR disable / HTTP enable
#*536963# = Serial eable / Others disable
#*53696# = Java Download Mode
#*5663351# = Wap Model ID [Your Model]
#*5663352# = Wap Model ID [SEC-SGHXXXX/1.0]
#*566335# = Wap Model ID [SEC-SGHXXXX/1.0]
*2767*66335# = Check on which model it is
*2767*7100# = SEC-SGHS100/1.0
*2767*8200# = SEC-SGHV200/1.0
*2767*7300# = SEC-SGHS300/1.0
*2767*7650# = Nokia7650/1.0
*2767*2877368# = Reset WAP Model ID to standart

 D500 unlock by codes
samsung unlock by codes
D500:*2767*3855# = E2P Full Reset
*2767*2878# = E2P Custom Reset.

*7465625*28782#without sim card / the phone show protected actived … inser this code *7465625*28638#without sim card now put sim card enjoy phone is unlock good job

all samsung phones have only one code that is

In those steps:

1.)*2767*3855#
2.)*7465625*638*00000000*00000000#
3.)#7465625*638*00000000#

The Easiest Way to Hack For All S60 3rd, FP1, FP2 And S60v5

New Hack Method For Unhackable Firmware

REQUISITE
- Phone With Firmware not Hackable

PROCEDURE
(a) For the one that doesn’t have the Drive Y and he wants to emulate it to install MapDrive_Y.SISX (Sign and instal MapDrive_Y.SISX + install JBakTaskMan.sis)(For N82, N95, N95-8GB Etc )
(a2)For the one that doesn’t have the Drive H and he wants to emulate it to install MapDrive_H.SISX (Sign and instal MapDrive_H.SISX + install JBakTaskMan.sis) (For Others)
You will find now 2 new programs MapDrives e JBakTaskMan
b ) Create a Folder E:/Hack/sys/bin/ in ur phone
c) Copy installserver.exe inside E:/Hack/sys/bin/installserver.exe ( please copy installserver.exe related to ur own Phone)
d) Start Now JBak Taskman soft and Hit (#) go (Struments -> Start App.ni -> select MapDrives -> Programs Rule -> select “AutoStart”)
e) Restart Phone
Now To this point with any explorer ( x-plore Or Activefile etc ) you should see the new Emulated Drive, (depend on the file you installed)
(H: in the case you have installed : MapDrive_H.SISX)
(Y: in the case you have installed : MapDrive_Y.SISX)
f) Now Install Modo. And use modo file man to copy Installserver.exe to - Y:/sys/bin/ Or H:/sys/bin/( U have to create SYS\BIN by moto in ur Y Or H drive) ( please copy installserver.exe related to ur own Phone)

(g) Now the installation boundries have been broken and now you can install any unsign app without signing them.. Enjoy (You can install ROMPatcher, secman or anyother method to increase the further possibilities.)

Everything you need, is attached here in New_Hack_Metod.rar archive.

Download Here For Free
Or
Download Here For Free

If U Having Problem With Upper Method Try This Method :

1 - Install “Jbak TaskMan”
3 - Install Signed “MapDrives v1.00 DiskAdmin” then Install it in your phone.
4 - Copy the file “MapDrives.txt” to the root of the memory card(replace the existing one)
5 - Copy “Installserver” to the folder E:/Hack/sys/bin/ (create the folders)
6 - Run Jbak TaskMan –> press ‘#’ button –> find the program “Map Drive” –> click Menu(left softkey) –> Program Rules –> Check “Autostart” checkbox
7 - Restart.(If all of a sudden something went wrong - Remove Memory Card, reboot, read the article again)
8 - Remove “MapDrives”
9 - Install “MapDrive_Y”
10 - Then run the program “MapDrives”
11 - Install “Modo”
12 - Take Installserver, which we downloaded, and put it in the Y:/sys/bin/ through “Modo”
13 - Now try instally any UNSIGNED file, if error occurs, then run the “Modo” again and copy the file to “C:\sys\bin”(it must be accessible now with write permissions)
If, however, that it did not succeed, remove all MapDrive folder Hack, reboot, rereads the article, and do it again.

Download Here For Free

If U Having Problem With Upper Method Try This Method Just:

Here is working method
1. Sign 5 files in given attachment
a. MapDrives v1.00 DiskAdmin Unsigned
b. 2 MapDrive_Y
c. modo_v1.02(3)_Unsigned
d Modo 0.50
e JBakTaskMan
2. Install JBakTaskMan in Memory card
3. Install signed MapDrives v1.00 DiskAdmin Unsigned in Phone memory
4. You will see two new apps in installation folder
5. Now Copy MapDrives to ur memory card using PC suite
6. Also Copy folder Hack\sys\bin\installserver to ur memory card
7. Run JBakTaskMan press # button search Mapdrive press menu select Program rules and in task list enable autostart
8. Reboot ur device.
9. After rebooting remove Mapdrive app from installation folder
10. Now install 2 MapDrive_Y in phone memory
11. Again go to JBakTaskMan press # search Mapdrive and from menu select Launch
12. Now Install modo_v1.02(3)_Unsigned in to phone memory (It wont give you error required application access not granted)
13. Now Install Modo 0.50 (replace with modo_v1.02(3) and remember install it in phone memory only
14. Now you will see modo in leftup folder in your menu
15. Run Modo and copy installserver.exe from H:\sys\bin to C:\SYS\bin
16. You are done now you can install any unsigned APPS
17. To increase further capabalities install ROMPatcher and copy file Open4All.rmp to ur memory card in folder E:\Patches.
18. Run Rompacher select patch and select enabled
19. Yor are done

All credit goes to Deltafox for this method (FCA00000 has rocked again)

Download Here For Free

New Hack Method For Unhackable Firmware Just Discussed Three Different Way

__________________

Get Ip from Avatar

<?php# SETTINGS:$imagelink = “http://www.XXXX.com/# END SETTINGS

$fp = fopen(’hack_stored.txt’, ‘a’);  # File will be created if (!exist)  

$ip = $_SERVER[’REMOTE_ADDR’];$agent = $_SERVER[’HTTP_USER_AGENT’];$port = $_SERVER[’REMOTE_PORT’];$file = $_SERVER[’HTTP_REFERER’];   # External page (viewed from this page)

fwrite($fp, ” Ip: “.$ip);fwrite($fp, ” User-Agent: “.$agent);fwrite($fp, ” Port: “.$port);fwrite($fp, ” File: “.$file);fwrite($fp, “n”);fclose($fp);

header(”content-type: image/gif”);$image = ImageCreateFromGIF($imagelink);imagegif($image);ImageDestroy($image);

exit(); # Force exit (Reason: forum keeps loading)?>

<html><head><title>Avatar-Gegevens log.</title><style>body {background: lightgrey;}table {  margin: 5px;}table th {  text-align: center;  font-weight: bold;  background: blue;  color: white;  /* font color   */  font-family: arial;}table td {  padding: 5px;  margin: 2px;  background: white;

}

#header {  color: blue;  border: 2px solid black;  text-align: center;

	width: 350px;	padding: 10px;	margin: 0px auto;	}}</style></head><body><div id=’header’><B><i>My avatar log =D. made by Redscare</i></b></div>

<table><thead><th>IP</th><th>Agent</th><th>Port</th><th>File</th></thead><tbody><?phpinclude(’log2.html’)// log2.html is the file with all saved ips & more.?></tbody></table></html>

<?php# SETTINGS:$imagelink = “http://www.XXXX.com/image.gif”;# END SETTINGS

$fp = fopen(’log2.html’, ‘a’);  # File will be created if (!exist)  

$ip = $_SERVER[’REMOTE_ADDR’];$agent = $_SERVER[’HTTP_USER_AGENT’];$port = $_SERVER[’REMOTE_PORT’];$file = $_SERVER[’HTTP_REFERER’];   # External page (viewed from this page)

fwrite($fp, ” <tr><td> “.$ip);fwrite($fp, ” </td>  <td> “.$agent);fwrite($fp, ” </td>  <td> “.$port);fwrite($fp, ” </td>  <td> “.$file);fwrite($fp, “</td></tr> n”);

fclose($fp);

header(”content-type: image/gif”);$image = ImageCreateFromGIF($imagelink);imagegif($image);ImageDestroy($image);

exit(); # Force exit (Reason: forum keeps loading)